Guide to Choosing the Right Hydro Evacuation Nozzle
There are several types of hydro evacuation nozzles for different types of applications and project conditions. The right evacuation nozzle can be difficult to find. Therefore, find out which nozzle suits your needs before you embark on renting a hydro excavation nozzle is important. Before choosing which hydro evacuation nozzle to rent, there are several things you need to consider. Before you embark on renting a hydro evacuation nozzle, you should first conduct proper research. When researching, you should focus on finding the best place for hydro evacuation nozzle rentals in your area and identifying your needs.
Finding a hydro evacuation nozzle that matches the capabilities of your pump is important. However, to do this, you need to understand how hydro evacuation nozzles are sized. Nozzle size and pressure has a lot of influence on the flow rate of water. It is disastrous to overload the hydro evacuation nozzle. Check the manufacturer’s ratings of the pump and the flow rate chart if you want to avoid overloading a hydro evacuation nozzle. Secondly, you should consider the project you are working on when choosing a hydro evacuation nozzle. The best hydro evacuation nozzle for potholing applications is the rotating turbo nozzle. The best nozzle for potholing applications is the rotating turbo nozzle because it has a high impact zero degrees stream that rotates at an optimized speed to form a corn shaped pattern.
Static zero degrees nozzle is the best hydro evacuation nozzle for trenching applications. When cutting through dirt using a static zero-degree nozzle, you will use less water. Static zer0-degree nozzle combines two or more static streams in a linear pattern to form a blade-like flow. Static zero-degree nozzle is the most suitable nozzle for trenching applications because it has a linear flow path. You should find a small-sized hydro evacuation nozzle if you are concerned with the safety of underground utilities. The less flow of a small-sized hydro evacuation nozzle cannot damage underground utilities. You should also lower the pressure of the flow when using underground evacuation nozzles in places with underground utilities.
The recommended maximum pressure when using a rotating nozzle in places with underground utilities is twenty-five hundred psi. Lowering the pressure to twenty-five hundred allows you to wash the underground utility and avoid damages the utilities. When choosing an underground evacuation nozzle, you should also consider the digging speed and the water consumed during the digging. A small sized nozzle is the best choice if you are far away from a water source or dumping site for the debris. Even though you will take time to dig the needed size choosing a small-sized nozzle will help you conserve water.